12 Tips for Easier and Faster Popcorn Ceiling Removal

In the 1960s, people loved to cover their drywall or plaster ceilings with a popcorn texture. Creating this texture was super easy because it didn’t require painting – and it hid lots of imperfections. However, over time, these messy textured surfaces catch dust and cobwebs that can be hard to clean quickly without damaging

If you have cracks or holes to fill, it can be challenging to get the proper texture match for your ceiling. However, remove a popcorn ceiling texture from a ceiling is difficult but worth the effort if there are no defects underneath.

Popcorn ceiling removal can be time consuming and difficult. When you’re finally ready to tackle the task, it’s best to do some research first. Here are some tips to take some of the pain out of popcorn ceiling removal in Denver, CO

Conduct a Scrape Test

Before you start prepping the room for popcorn ceiling removal, it is advised to simply try scraping off a small section of popcorn using just a hand scraper. A popcorn ceiling has a dry and bumpy texture, so the process for removing it may be different if it was painted or is at least damp. Whether wetting the ceiling helps at all or not depends on how bad your popcorn texture actually is. In such cases, you may have to pick between a really tough scraping job or another method of concealing the said ceiling.

Test for the Presence of Asbestos

If you are removing popcorn ceiling from a home before, testing for the presence of asbestos may be required in order to protect your health. Even if the test comes back positive, you can cover the popcorn with new drywall or tongue-and-groove planks. If you’re unable to do it yourself, hire an asbestos abatement contractor in Denver, CO to help in your popcorn ceiling removal.

Prepare the Area For a Mess

As you begin your how to remove popcorn ceiling project, cover the floor and walls with plastic drop cloths. For cleaner cleanup, use plastic drop clothes instead of canvas ones because water can seep through. Leave the plastic in place after popcorn ceiling removal to catch messes as you repair and sand the ceiling later.

Remove all Furniture

When learning how to remove popcorn ceiling, it is best to remove furniture. You won’t want your furniture in the way every time you move the ladder around. If moving everything out of the room isn’t possible, cluster it and cover it with drop cloths.

Remove Ceiling Fixtures and Fans

Leaving light fixtures and ceiling fans in place while you figure out how to remove popcorn ceiling will get in the way and may result in inaccurate water placement, so it is best that they are removed first.

Protect Can Lights From Water Spray

In addition to stuffing newspaper or rosin paper into recessed can lights, turn those power sources off at the circuit breaker panel or fuse box before starting your how to remove popcorn ceilings project.

Get a sprayer and add few gallons of water to it

It is essential to soften the popcorn ceiling before scraping it which you can do by spraying it with a garden sprayer. Water thoroughly and wait for about 15 minutes, then check if its soft enough. If not, repeat the process again after 10 – 15 minutes until satisfied.

In order for popcorn ceiling removal faster and easier, it is vital to confirm the texture wasn’t just painted. If the texture was merely painted, you may be able to dry-scrape until some of the panting becomes exposed. But if paint was mixed into the texture before hand, then completely wetting down the ceiling could potentially be necessary.

Cover Electrical Boxes

Shut off any junction boxes in the ceiling before starting your popcorn ceiling removal project and cover them with painter’s tape to keep the power cables dry. Then, overlap their open edges with tape and cut around them using a utility knife making sure not to damage wires.

Work in Small Sections

It is best to work on small areas at a time. If you try to do too much, the popcorn might dry before you have time to remove it. Respray the area and wait 10-15 minutes before resuming removal.

Use a mud pan to make clean-up fast and easy

To remove popcorn ceilings more quickly and effectively, use a mud pan (kind for holding joint compound) to catch the falling material before it reaches the floor. While you move around with your ladder in hand or step on/off of it, use the edge of the pan to clean off your scraper as it accumulates wet popcorn.

Avoid Gouging

Remove popcorn ceilings faster and easier by rounding off the edges of a drywall knife. You can use an electric sander, grind stone or file to do this.

Smooth After Scraping

Scraping a popcorn ceiling can leave small dings and gouges that may require additional work to repair. Scraping alone won’t give you a perfect paint-ready surface, so you’ll likely have to sand the ceiling down completely in order for it to look smooth.

How Much Does Popcorn Ceiling Removal Cost in Denver

The cost of removing a popcorn ceiling was reported by Home Advisor to be $1,707 on average. Removing popcorn ceiling is a laborious process, which is best left to the professionals who take precautions to ensure safety. It’s also important to check for asbestos before starting.

Looking for Professional Painters in Denver, CO

If you are looking to hire someone for your popcorn ceiling removal, be sure to call an local expert painters in Denver, CO who can create the look that’s right for you.

Harmony Painting
2008 S Corona St
Denver, CO 80210
(720) 571-0500
https://harmonypaintingdenver.com/

Comments are closed.